MediSure BLOOD GLUCOSE MONITORING SYSTEM Guia do Utilizador descarregar pdf (Página 8)

Section 2. How Your System Works

2.1 Installing / Relacing the Battery

Your Blood Glucose Monitoring System is

packed with one 3-volt lithium coin battery that

needs to be installed before testing. The battery

can last for more than 1,000 tests. However, it

varies because of usage, so always keep spare

batteries on hand. When the battery symbol

appears on the display, it means your battery is

low. Although the meter will still provide accurate

results, the battery should be replaced as soon as

possible. After the battery is replaced, reset the

date, time, and units.

1) Flip open the battery cover by

pushing the tab.

2) Use the battery cover to pull the

battery out of the battery locker.

3) Insert a new battery with the

positive (+) side up and make sure

the battery is placed under the

battery holder. Press the battery

down firmly. Slide the battery cover

back until it snaps into place.

4) The LCD will display “Set” for about 1 second.

5) Reset the date,time,and units.

pull

F D K

＊ Steps to Install / Replace the Battery :

(See Section 2.2 Setting the Date, Time, and Units.)

＊

Medi+Sure

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Sem comentários

MediSure BLOOD GLUCOSE MONITORING SYSTEM Guia do Utilizador Página 8